Skip to content

2023-06-07 OPF and OBF reinstall on off2#

We will follow closely what we did for opff reinstall on off2. Refer to it if you need more explanation on a step.

Putting data in zfs datasets#

creating datasets#

Products dataset are already there, we create the other datasets.

zfs create zfs-hdd/obf/cache
zfs create zfs-hdd/obf/html_data
zfs create zfs-hdd/obf/images
zfs create zfs-hdd/opf/cache
zfs create zfs-hdd/opf/html_data
zfs create zfs-hdd/opf/images

and change permissions:

sudo chown 1000:1000  /zfs-hdd/o{b,p}f/{,html_data,images,cache}

adding to sanoid conf#

We do it asap, as we need some snapshots to be able to use syncoid.

We edit sanoid.conf to put our new datasets with use_template=prod_data.

We can launch the service immediately if we want: systemctl start sanoid.service

migrating root datasets on ovh3#

If we want to synchronize opf and obf root dataset, they have to be created by syncing from off2. But as they already exists on ovh3, we have to create them, move products in them, and swap the old and the new one (avoiding doing so during a sync).

prepare#

verify which datasets exists under the old root datasets on ovh3:

$ zfs list -r rpool/opf rpool/obf
NAME                 USED  AVAIL     REFER  MOUNTPOINT
rpool/obf           12.2G  23.9T      208K  /rpool/obf
rpool/obf/products  12.2G  23.9T     2.92G  /rpool/obf/products
rpool/opf           4.20G  23.9T      208K  /rpool/opf
rpool/opf/products  4.20G  23.9T     1.12G  /rpool/opf/products

as expected, only products have to be moved.

create new target datasets#

On off2:

sudo syncoid --no-sync-snap zfs-hdd/opf  root@ovh3.openfoodfacts.org:rpool/opf-new
sudo syncoid --no-sync-snap zfs-hdd/obf  root@ovh3.openfoodfacts.org:rpool/obf-new
it's very fast.

move products to new dataset and swap datasets#

zfs rename rpool/opf{,-new}/products && \
zfs rename rpool/opf{,-old} && \
zfs rename rpool/opf{-new,}

zfs rename rpool/obf{,-new}/products && \
zfs rename rpool/obf{,-old} && \
zfs rename rpool/obf{-new,}

setup sync#

We can now sync them regularly by editing /etc/sanoid/syncoid-args.conf:

# opf
--no-sync-snap zfs-hdd/opf root@ovh3.openfoodfacts.org:rpool/opf
# obf
--no-sync-snap zfs-hdd/obf root@ovh3.openfoodfacts.org:rpool/obf

I also added it to sanoid.conf ovh3, but using synced template.

Products#

They already are synced (cf. opff reinstall on off2)

Users#

We have nfs mount of the users folder of off1, and will use it

Products images#

We will do a rsync, that we will have to repeat when putting in production.

On off2 (in a screen), as root:

time rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/html/images/products  /zfs-hdd/obf/images && \
time rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/html/images/products  /zfs-hdd/opf/images
this took 80 and 30 minutes.

Then sync to ovh3:

time syncoid --no-sync-snap zfs-hdd/obf/images root@ovh3.openfoodfacts.org:rpool/obf/images
time syncoid --no-sync-snap zfs-hdd/opf/images root@ovh3.openfoodfacts.org:rpool/opf/images

After first sync (which took took 31 and 38 min),

I added it to /etc/syncoid-args.conf 

--no-sync-snap zfs-hdd/obf/images root@ovh3.openfoodfacts.org:rpool/obf/images
--no-sync-snap zfs-hdd/opf/images root@ovh3.openfoodfacts.org:rpool/opf/images

I also added it to sanoid.conf ovh3, but using synced template.

Other data#

I rsync cache data and other data on ofF2:

# cache
time rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/{build-cache,tmp,debug,new_images} /zfs-hdd/opf/cache
time rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/{build-cache,tmp,debug,new_images} /zfs-hdd/obf/cache
# other
time rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/{deleted.images,data} /zfs-hdd/opf/
time rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/{deleted.images,data} /zfs-hdd/obf/
# html/data
time rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/html/data/ /zfs-hdd/opf/html_data
time rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/html/data/ /zfs-hdd/obf/html_data
It took less than 3 min.

Then start the sync for cache and html_data: 

for target in {opf,obf}/{cache,html_data}; do time syncoid --no-sync-snap zfs-hdd/$target root@ovh3.openfoodfacts.org:rpool/$target; done

Add them to /etc/sanoid/syncoid-args.conf

And on ovh3 add them to sanoid.conf with synced_data template

Creating Containers#

I created a CT for obf followings How to create a new Container it went all smooth. I choosed a 30Gb disk, 0B swap, 4 Cores and 6 Gb memory.

I also configure postfix and tested it.

Important: do not create any user until you changed id maping in lxc conf (see Mounting volumes). And also think about creating off user before any other user to avoid having to change users uids, off must have uid 1000.

Installing generic packages#

I also installed generic packages:

sudo apt install -y apache2 apt-utils g++ gcc less make gettext wget vim

Geoip with updates#

Installed geoip with updates, and copied /etc/GeoIP.conf from opff: 

sudo apt install geoipupdate
vim /etc/GeoIP.conf
…
sudo chmod o-rwx /etc/GeoIP.conf

Test it: 

sudo systemctl start geoipupdate.service
sudo systemctl status geoipupdate.service
…
juin 12 16:18:34 obf systemd[1]: geoipupdate.service: Succeeded.
juin 12 16:18:34 obf systemd[1]: Finished Weekly GeoIP update.
juin 12 16:18:34 obf systemd[1]: geoipupdate.service: Consumed 3.231s CPU time.
…

Clone obf as opf#

I then shutdow the obf VM and clone it as opf.

After cloning I had to change network IP address settings before starting.

Installing packages#

On obf and opf

sudo apt install -y apache2 apt-utils cpanminus g++ gcc less libapache2-mod-perl2 make gettext wget imagemagick graphviz tesseract-ocr libtie-ixhash-perl libwww-perl libimage-magick-perl libxml-encoding-perl libtext-unaccent-perl libmime-lite-perl libcache-memcached-fast-perl libjson-pp-perl libclone-perl libcrypt-passwdmd5-perl libencode-detect-perl libgraphics-color-perl libbarcode-zbar-perl libxml-feedpp-perl liburi-find-perl libxml-simple-perl libexperimental-perl libapache2-request-perl libdigest-md5-perl libtime-local-perl libdbd-pg-perl libtemplate-perl liburi-escape-xs-perl libmath-random-secure-perl libfile-copy-recursive-perl libemail-stuffer-perl liblist-moreutils-perl libexcel-writer-xlsx-perl libpod-simple-perl liblog-any-perl liblog-log4perl-perl liblog-any-adapter-log4perl-perl libgeoip2-perl libemail-valid-perl libmath-fibonacci-perl libev-perl libprobe-perl-perl libmath-round-perl libsoftware-license-perl libtest-differences-perl libtest-exception-perl libmodule-build-pluggable-perl libclass-accessor-lite-perl libclass-singleton-perl libfile-sharedir-install-perl libnet-idn-encode-perl libtest-nowarnings-perl libfile-chmod-perl libdata-dumper-concise-perl libdata-printer-perl libdata-validate-ip-perl libio-compress-perl libjson-maybexs-perl liblist-allutils-perl liblist-someutils-perl libdata-section-simple-perl libfile-which-perl libipc-run3-perl liblog-handler-perl libtest-deep-perl libwant-perl libfile-find-rule-perl liblinux-usermod-perl liblocale-maketext-lexicon-perl liblog-any-adapter-tap-perl libcrypt-random-source-perl libmath-random-isaac-perl libtest-sharedfork-perl libtest-warn-perl libsql-abstract-perl libauthen-sasl-saslprep-perl libauthen-scram-perl libbson-perl libclass-xsaccessor-perl libconfig-autoconf-perl libdigest-hmac-perl libpath-tiny-perl libsafe-isa-perl libspreadsheet-parseexcel-perl libtest-number-delta-perl libdevel-size-perl gnumeric libreadline-dev libperl-dev

Mounting volumes#

In our target production we will have obf, opf and opff in off2, so we cross mount their products and images volumes, while keeping nfs volumes for off products, and mounting zfs images volume.

But as opff is already in prod, we don't change it now

changing lxc confs#

On off2, editing /etc/pve/lxc/11{1,2}.conf

So for obf: 

mp0: /zfs-hdd/obf,mp=/mnt/obf
mp1: /zfs-hdd/obf/products/,mp=/mnt/obf/products
mp2: /mnt/off1/off-users,mp=/mnt/obf/users
mp3: /zfs-hdd/obf/images,mp=/mnt/obf/images
mp4: /zfs-hdd/obf/html_data,mp=/mnt/obf/html_data
mp5: /zfs-hdd/obf/cache,mp=/mnt/obf/cache
mp6: /mnt/off1/off-products,mp=/mnt/off/products
mp7: /zfs-hdd/off/images,mp=/mnt/off/images
mp8: /zfs-hdd/opff/products,mp=/mnt/opff/products
mp9: /zfs-hdd/opff/images,mp=/mnt/opff/images
mp10: /zfs-hdd/opf/products,mp=/mnt/opf/products
mp11: /zfs-hdd/opf/images,mp=/mnt/opf/images
…
lxc.idmap: u 0 100000 999
lxc.idmap: g 0 100000 999
lxc.idmap: u 1000 1000 10
lxc.idmap: g 1000 1000 10
lxc.idmap: u 1011 101011 64525
lxc.idmap: g 1011 101011 64525


pct reboot 111

So for opf: 

mp0: /zfs-hdd/opf,mp=/mnt/opf
mp1: /zfs-hdd/opf/products/,mp=/mnt/opf/products
mp2: /mnt/off1/off-users,mp=/mnt/opf/users
mp3: /zfs-hdd/opf/images,mp=/mnt/opf/images
mp4: /zfs-hdd/opf/html_data,mp=/mnt/opf/html_data
mp5: /zfs-hdd/opf/cache,mp=/mnt/opf/cache
mp6: /mnt/off1/off-products,mp=/mnt/off/products
mp7: /zfs-hdd/off/images,mp=/mnt/off/images
mp8: /zfs-hdd/opff/products,mp=/mnt/opff/products
mp9: /zfs-hdd/opff/images,mp=/mnt/opff/images
mp10: /zfs-hdd/obf/products,mp=/mnt/obf/products
mp11: /zfs-hdd/obf/images,mp=/mnt/obf/images
…
lxc.idmap: u 0 100000 999
lxc.idmap: g 0 100000 999
lxc.idmap: u 1000 1000 10
lxc.idmap: g 1000 1000 10
lxc.idmap: u 1011 101011 64525
lxc.idmap: g 1011 101011 64525


pct reboot 112

Warning: after changing lxc idmap, the alex user which I already created, now as an id which is not mapped correctly. More over it was a mistake to create it immediatly as it have id 1000, which should be reserved to off user. This makes it impossible to log with ssh as .ssh/authorized_keys is not readable !

To remedy that, on obf and opf, using pct enter 111/2, we will also create off user: 

usermod -u 1001 alex
groupmod -g 1001 alex
adduser --uid 1000 off
And then from off2, we will change ownership on the mounted ZFS dataset. 
sudo chown 1001:1001 -R /zfs-hdd/pve/subvol-11{1,2}-disk-0/home/alex

SSH problem#

I add a problem with ssh connection being very long. Looking at /var/log/syslog why logging in, I saw: 

systemd-logind.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc: Permission denied
Jun 13 13:35:19 obf systemd[734]: systemd-logind.service: Failed at step NAMESPACE spawning /lib/systemd/systemd-logind: Permission denied
It seems to be related to recent versions of systemd needs nesting (see here) and so I enabled it by editing /etc/pve/lxc/11{1,2}.conf, adding features: nesting=1. It fixes the problem. (and indeed 110 was created with this setting on)

Getting the code#

Copying production code#

I started by copying current code from off1 to each container, while avoiding data. I put code in /srv/opf-old/ and /srv/obf-old/ so that I can easily compare to git code later on.

On off2 as root: 

mkdir /zfs-hdd/pve/subvol-111-disk-0/srv/obf-old/
rsync -x -a --info=progress2 --exclude "logs/" --exclude "html/images/products/" --exclude "html/data" --exclude "deleted.images" --exclude "tmp/" --exclude "new_images/" --exclude="build-cache" off1.openfoodfacts.org:/srv/obf/ /zfs-hdd/pve/subvol-111-disk-0/srv/obf-old/
# there are some permissions problems
sudo chown 1000:1000 -R /zfs-hdd/pve/subvol-111-disk-0/srv/obf-old/

mkdir /zfs-hdd/pve/subvol-112-disk-0/srv/opf-old/
rsync -x -a --info=progress2 --exclude "logs/" --exclude "html/images/products/" --exclude "html/data" --exclude "deleted.images" --exclude "tmp/" --exclude "new_images/" --exclude="build-cache" off1.openfoodfacts.org:/srv/opf/ /zfs-hdd/pve/subvol-112-disk-0/srv/opf-old/
# there are some permissions problems
sudo chown 1000:1000 -R /zfs-hdd/pve/subvol-112-disk-0/srv/opf-old/

Cloning off-server repository#

First I create a key for off to access off-server repo: 

sudo -u off ssh-keygen -f /home/off/.ssh/github_off-server -t ed25519 -C "off+off-server@obf.openfoodfacts.org"
sudo -u off vim /home/off/.ssh/config
…
# deploy key for openfoodfacts-server
Host github.com-off-server
        Hostname github.com
        IdentityFile=/home/off/.ssh/github_off-server
…
cat /home/off/.ssh/github_off-server.pub
Go to github add the obf pub key for off to productopener repository with write access:

Then clone repository, on obf:

sudo mkdir /srv/obf
sudo chown off:off /srv/obf
sudo -u off git clone git@github.com-off-server:openfoodfacts/openfoodfacts-server.git /srv/obf

Make it shared: 

cd /srv/obf
sudo -u off git config core.sharedRepository true
sudo chmod g+rwX -R .

I will generaly work to modify / commit to the repository using my user alex, while using off only to push. So as alex on obf: 

git config --global --add safe.directory /srv/obf
git config --global --add author.name "Alex Garel"
git config --global --add author.email "alex@openfoodfacts.org"
git config --global --add user.name "Alex Garel"
git config --global --add user.email "alex@openfoodfacts.org"

Do the same on opf.

Finding git commit for obf#

ls -ltr /srv/obf-old/{lib/ProductOpener/,cgi/} seems to indicate to search commits around 2021-02-03

git log --stat --before=2021-02-03 to search, the last seems to be ok: 7443d1c839150a21a1a0e14834aa8674b52c5f43

We checkout this one in /srv/obf and try to see the differences with obf-old. I do this on my computer because I want to use meld.

NB: I had to change permissions for /srv/obf-old/html/js/bak/countries and /srv/obf-old/lang: sudo chmod a+rX -R /srv/obf-old/html/js/bak/countries /srv/obf-old/lang/

It's a hard work…

See Annex files difference for obf in git vs server

Also I copied Config2.pm: cp /srv/obf-old/lib/ProductOpener/Config2.pm lib/ProductOpener/

Also copied Users.pm as it has some protection to spam.

Finding git commit for opf#

ls -ltr /srv/opf-old/{lib/ProductOpener/,cgi/} seems to indicate to search commits around 2020-05-30

git log --stat --before=2020-05-30 to search, the last with taxonomy build seems to be ok: ~~88573d0b4450af9fd3fe4c342f46255007cab3b2~~ but it's not, if we look at po file and lang/opf/en/texts/data.html, we should take ccf9ce1d5f42fe58b1462a13b7ed7c52dc335f4f

We checkout this one in /srv/obf and try to see the differences with obf-old. I do this on my computer because I want to use meld.

NB: I had to change permissions for /srv/obf-old/html/js/bak/countries and /srv/obf-old/lang: sudo chmod a+rX -R /srv/obf-old/html/js/bak/countries /srv/obf-old/lang/

It's a hard work…

See Annex files difference for opf in git vs server

Installing#

We have git cloned our repository in /srv/o{b,p}f.

Now we create symlinks to mimic old structure:

On obf, as root: 

for site in o{f,p,pf}f;do \
  mkdir -p /srv/$site/html/images/ && \
  chown -R off:off -R /srv/$site/ && \

  ln -s /mnt/$site/products /srv/$site/products; ln -s /mnt/$site/images/products /srv/$site/html/images/products; \
done
ls -l /srv/o{f,p,pf}f/ /srv/$site/html/images
on opf, same with o{f,b,pf}f

linking data#

Unless stated otherwise operation are done with user off.

Create links for users and products

for obf 

ln -s /mnt/obf/products /srv/obf/products
ln -s /mnt/obf/users /srv/obf/users
# old versions of Product opener needs users_emails.sto in /srv/xxx
ln -s /mnt/obf/users/users_emails.sto /srv/obf/users_emails.sto
# verify
ls -l /srv/obf/html/data /srv/obf/users_emails.sto /srv/obf/products /srv/obf/users

for opf 

ln -s /mnt/opf/products /srv/opf/products
ln -s /mnt/opf/users /srv/opf/users
# old versions of Product opener needs users_emails.sto in /srv/xxx
ln -s /mnt/opf/users/users_emails.sto /srv/opf/users_emails.sto
# verify
ls -l /srv/opf/html/data /srv/opf/users_emails.sto /srv/opf/products /srv/opf/users

We have some permissions problems on some data, to fix this on off2: 

sudo chown 1000:1000 -R /zfs-hdd/opf/html_data/ /zfs-hdd/obf/html_data/

Create links for data folders, also moving data to zfs datasets:

for obf: 

# html data
mv /srv/obf/html/data/data-fields.txt /mnt/obf/html_data/
rmdir /srv/obf/html/data
ln -s /mnt/obf/html_data /srv/obf/html/data
# product images
rmdir /srv/obf/html/images/products/
# verify
ln -s /mnt/obf/images/products  /srv/obf/html/images/products

for opf: 

# html data
mv /srv/opf/html/data/data-fields.txt /mnt/opf/html_data/
rmdir /srv/opf/html/data
ln -s /mnt/opf/html_data /srv/opf/html/data
# product images
rmdir /srv/opf/html/images/products/
# verify
ln -s /mnt/opf/images/products  /srv/opf/html/images/products

We also want to move Lang file and deleted.images in data folder but keep compatibility (it's an old version)

for obf: 

# deleted.images
mv /srv/obf/deleted.images /mnt/obf/
ln -s  /{mnt,srv}/obf/deleted.images
mkdir /mnt/obf/data/
# note: specific file name
cp /srv/obf-old/Lang.openbeautyfacts.org.sto /mnt/obf/data/
ln -s /mnt/obf/data/Lang.openbeautyfacts.org.sto /srv/obf/

for opf: 

# deleted.images
mv /srv/opf/deleted.images /mnt/opf/
ln -s  /{mnt,srv}/opf/deleted.images
mkdir /mnt/opf/data/
# note: specific file name
cp /srv/opf-old/Lang.openproductsfacts.org.sto /mnt/opf/data/
ln -s /mnt/opf/data/Lang.openproductsfacts.org.sto /srv/opf/

Create and link cache folders

for obf: 

# build-cache (was non existent)
mkdir /mnt/obf/cache/build-cache
ln -s /mnt/obf/cache/build-cache /srv/obf/build-cache
ln -s /mnt/obf/cache/tmp /srv/obf/tmp
ln -s /mnt/obf/cache/debug /srv/obf/debug
ln -s /mnt/obf/cache/new_images /srv/obf/new_images
# verify
ls -l /srv/obf/tmp /srv/obf/debug /srv/obf/new_images /srv/obf/build-cache

for opf: 

# build-cache (was non existent)
mkdir /mnt/opf/cache/build-cache
ln -s /mnt/opf/cache/build-cache /srv/opf/build-cache
ln -s /mnt/opf/cache/tmp /srv/opf/tmp
ln -s /mnt/opf/cache/debug /srv/opf/debug
ln -s /mnt/opf/cache/new_images /srv/opf/new_images
# verify
ls -l /srv/opf/tmp /srv/opf/debug /srv/opf/new_images /srv/opf/build-cache

We also want to move html/data/data-field.txt outside the data volume and link it, as user off. 

cd srv/obf
mv html/data/data-field.txt html/data-field.txt
ln -s ../data-fields.txt html/data/data-fields.txt
And add the html/data-field.txt file to git.

Opf does not have it on prod, still we had to commit the removal of html/data/data-fields.txt to the repository

linking logs#

We want logs to go in /var/logs.

We will create a directory for instance (obf/opf) and also add links to nginx and apache2 logs.

for obf: 

sudo mkdir /var/log/obf
sudo chown off:off -R /var/log/obf
sudo -u off rmdir /srv/obf/logs/
sudo -u off ln -s /var/log/obf /srv/obf/logs
sudo  -u off ln -s ../apache2 /var/log/obf
sudo -u off ln -s ../nginx /var/log/obf

for opf: 

sudo mkdir /var/log/opf
sudo chown off:off -R /var/log/opf
sudo -u off rmdir /srv/opf/logs/
sudo -u off ln -s /var/log/opf /srv/opf/logs
sudo  -u off ln -s ../apache2 /var/log/opf
sudo -u off ln -s ../nginx /var/log/opf

Copy original log.conf and make it a symlink.

For obf: 

cp /srv/obf-old/log.conf /srv/obf/conf/obf-log.conf
rm /srv/obf/log.conf
ln -s conf/obf-log.conf /srv/obf/log.conf
# verify
ls -l /srv/obf/log.conf

For opf: 

cp /srv/opf-old/log.conf /srv/opf/conf/opf-log.conf
rm /srv/opf/log.conf
ln -s conf/opf-log.conf /srv/opf/log.conf
# verify
ls -l /srv/opf/log.conf

For obf:

cp /srv/obf-old/lib/ProductOpener/Config2.pm /srv/obf/lib/ProductOpener/Config2.pm
ln -s SiteLang_obf.pm /srv/obf/lib/ProductOpener/SiteLang.pm
ln -s Config_obf.pm /srv/obf/lib/ProductOpener/Config.pm
# verify
ls -l /srv/obf/lib/ProductOpener/{SiteLang,Config,Config2}.pm
and for opf, SiteLang does not seems to exist ! 
cp /srv/opf-old/lib/ProductOpener/Config2.pm /srv/opf/lib/ProductOpener/Config2.pm
ln -s Config_opf.pm /srv/opf/lib/ProductOpener/Config.pm
# verify
ls -l /srv/opf/lib/ProductOpener/{SiteLang,Config,Config2}.pm

obf: sudo find /srv/obf-old -xtype l | xargs ls -l, see Annex: obf broken links

opf: sudo find /srv/opf-old -xtype l | xargs ls -l, see Annex: opf broken links

Adding dists#

For obf:

Create a folder for dist: 

sudo mkdir /srv/obf-dist
sudo chown off:off -R /srv/obf-dist

As off, transfer dists in it (as user off): 

cp -r  /srv/obf-old/html/images/icons/dist /srv/obf-dist/icons
cp -r /srv/obf-old/html/css/dist  /srv/obf-dist/css
cp -r /srv/obf-old/html/js/dist  /srv/obf-dist/js

And use symbolic links in folders (as user off):

# first link for whole folder
ln -s /srv/obf-dist /srv/obf/dist
# relative links for the rest
ln -s ../../../dist/icons /srv/obf/html/images/icons/dist
ln -s ../../dist/css /srv/obf/html/css/dist
ln -s ../../dist/js /srv/obf/html/js/dist
# verify
ls -l  /srv/obf/dist /srv/obf/html/{images/icons,css,js}/dist

Same for opf:

Create a folder for dist: 

sudo mkdir /srv/opf-dist
sudo chown off:off -R /srv/opf-dist

As off, transfer dists in it (as user off): 

cp -r  /srv/opf-old/html/images/icons/dist /srv/opf-dist/icons
cp -r /srv/opf-old/html/css/dist  /srv/opf-dist/css
cp -r /srv/opf-old/html/js/dist  /srv/opf-dist/js

And use symbolic links in folders (as user off):

# first link for whole folder
ln -s /srv/opf-dist /srv/opf/dist
# relative links for the rest
ln -s ../../../dist/icons /srv/opf/html/images/icons/dist
ln -s ../../dist/css /srv/opf/html/css/dist
ln -s ../../dist/js /srv/opf/html/js/dist
ls -l  /srv/opf/dist /srv/opf/html/{images/icons,css,js}/dist

Adding openfoodfacts-web#

We have some content that we want to take from openfoodfacts-web (also because shared with off). So we want to clone it.

Cloning repo#

Note that I add to make two deploys keys as explained in github documentation and use a specific ssh_config hostname for openfoodfacts-web:

Create new key, as off: 

# deploy key for openfoodfacts-web
ssh-keygen -t ed25519 -C "off+off-web@obf.openfoodfacts.org" -f /home/off/.ssh/github_off-web

Add a specific host in ssh config 

# /home/off/.ssh/config
Host github.com-off-web
    Hostname github.com
    IdentityFile=/home/off/.ssh/github_off-web

In github add the /home/off/.ssh/github_off-web.pub to deploy keys for openfoodfacts-web.

Cloning: 

sudo mkdir /srv/openfoodfacts-web
sudo chown off:off /srv/openfoodfacts-web
sudo -u off git clone git@github.com-off-web:openfoodfacts/openfoodfacts-web.git /srv/openfoodfacts-web

Do the same for opf

Linking content#

We clearly want obf lang folder to come from off-web:

for obf (as off): 

rm -rf /srv/obf/lang/obf/
ln -s /srv/openfoodfacts-web/lang/obf/ /srv/obf/lang/obf

for opf (as off): 

rm -rf /srv/opf/lang/opf/
ln -s /srv/openfoodfacts-web/lang/opf/ /srv/opf/lang/opf

We then will link press, contacts, term of use (as user off) 

# USE WITH CARE !
cd /srv/obf/lang
for FNAME in contacts.html press.html terms-of-use.html; do \
  for LANG in $(ls -d ?? ??_*); do \
    FILE_PATH=$LANG/texts/$FNAME;
    if [[ -e /srv/openfoodfacts-web/lang/$FILE_PATH ]]; then \
        rm $FILE_PATH; \
        ln -s /srv/openfoodfacts-web/lang/$FILE_PATH $FILE_PATH; \
    fi; \
  done; \
done;

We can verify with: 

ls -l */texts/{contacts,press,terms-of-use}.html

Same for opf.

We keep the rest as is for now.

Linking logo images#

No need of it for obf, logo names are handled by SiteLang_obf.pm and po/openbeautyfacts/??.po

No need of it for opf neither, logo names are handled by po/openbeautyfacts/??.po

On OBF:

We want to use the new logo. We uploaded a new version as:

  • openbeautyfacts-logo.svg
  • openbeautyfacts-logo-178x150.png
  • openbeautyfacts-logo-356x300.png
  • openbeautyfacts-logo-712x600.png

And the want to link every versions to them. For that we run.

cd /srv/obf/html/images/misc/
for f in openbeautyfacts-logo-??.svg;do rm $f;ln -s openbeautyfacts-logo.svg $f;done
for f in openbeautyfacts-logo-??-178x150.png;do rm $f && ln -s openbeautyfacts-logo-178x150.png $f;done
for f in openbeautyfacts-logo-??-356x300.png;do rm $f && ln -s openbeautyfacts-logo-356x300.png $f;done
for f in openbeautyfacts-logo-??-712x600.png;do rm $f && ln -s openbeautyfacts-logo-712x600.png $f;done
for f in openbeautyfacts-logo-??.png;do rm $f && ln -s openbeautyfacts-logo-178x150.png $f;done
rm openbeautyfacts-logo-zh-CN-712x600.png && ln -s openbeautyfacts-logo-712x600.png openbeautyfacts-logo-zh-CN-712x600.png

On OPF:

We want to use the new logo. We uploaded a new version as:

  • openproductsfacts-logo.svg
  • openproductsfacts-logo-178x150.png
  • openproductsfacts-logo-356x300.png
  • openproductsfacts-logo-712x600.png

And the want to link every versions to them. For that we run.

cd /srv/opf/html/images/misc/
for f in openproductsfacts-logo-??.svg;do rm $f;ln -s openproductsfacts-logo.svg $f;done
for f in openproductsfacts-logo-??-178x150.png;do rm $f && ln -s openproductsfacts-logo-178x150.png $f;done
for f in openproductsfacts-logo-??-356x300.png;do rm $f && ln -s openproductsfacts-logo-356x300.png $f;done
for f in openproductsfacts-logo-??-712x600.png;do rm $f && ln -s openproductsfacts-logo-712x600.png $f;done
for f in openproductsfacts-logo-??.png;do rm $f && ln -s openproductsfacts-logo-178x150.png $f;done
rm openproductsfacts-logo-zh-CN-712x600.png && ln -s openproductsfacts-logo-712x600.png openproductsfacts-logo-zh-CN-712x600.png

Installing CPAN#

First add Apache2::Connection::XForwardedFor and Apache::Bootstrap to cpanfile

cd /srv/obf
sudo apt install libapache2-mod-perl2-dev
sudo cpanm --notest --quiet --skip-satisfied --installdeps .

Setting up services#

NGINX for OBF and OPF (inside container)#

Installed nginx sudo apt install nginx.

Removed default site sudo unlink /etc/nginx/sites-enabled/default

On off2, Copied production nginx configuration of off1: 

# base configs
sudo scp 10.0.0.1:/etc/nginx/sites-enabled/obf /zfs-hdd/pve/subvol-111-disk-0/srv/obf/conf/nginx/sites-available/
sudo scp 10.0.0.1:/etc/nginx/sites-enabled/opf /zfs-hdd/pve/subvol-112-disk-0/srv/opf/conf/nginx/sites-available/
# other config files
sudo scp 10.0.0.1:/etc/nginx/{expires-no-json-xml.conf,snippets/off.cors-headers.include} /zfs-hdd/pve/subvol-111-disk-0/srv/obf/conf/nginx/snippets/
sudo scp 10.0.0.1:/etc/nginx/{expires-no-json-xml.conf,snippets/off.cors-headers.include} /zfs-hdd/pve/subvol-112-disk-0/srv/opf/conf/nginx/snipets/
sudo scp 10.0.0.1:/etc/nginx/mime.types /zfs-hdd/pve/subvol-111-disk-0/srv/obf/conf/nginx/
sudo scp 10.0.0.1:/etc/nginx/mime.types /zfs-hdd/pve/subvol-112-disk-0/srv/opf/conf/nginx/
sudo chown 1000:1000 -R  /zfs-hdd/pve/subvol-111-disk-0/srv/obf/conf/
sudo chown 1000:1000 -R  /zfs-hdd/pve/subvol-112-disk-0/srv/opf/conf

I added /srv/obf/conf/nginx/conf.d/log_format_realip.conf (on obf), same for opf, with same content as the one on opff (it's now in git).

Then made symlinks:

  • For obf: 
    sudo ln -s /srv/obf/conf/nginx/sites-available /etc/nginx/sites-enabled/obf
sudo ln -s /srv/obf/conf/nginx/snippets/expires-no-json-xml.conf /etc/nginx/snippets
sudo ln -s /srv/obf/conf/nginx/snippets/off.cors-headers.include /etc/nginx/snippets
sudo ln -s /srv/obf/conf/nginx/conf.d/log_format_realip.conf /etc/nginx/conf.d
sudo rm /etc/nginx/mime.types
sudo ln -s /srv/obf/conf/nginx/mime.types /etc/nginx/
  • For opf: 
    sudo ln -s /srv/opf/conf/nginx/sites-available /etc/nginx/sites-enabled/opf
sudo ln -s /srv/opf/conf/nginx/snippets/expires-no-json-xml.conf /etc/nginx/snippets
sudo ln -s /srv/opf/conf/nginx/snippets/off.cors-headers.include /etc/nginx/snippets
sudo ln -s /srv/opf/conf/nginx/conf.d/log_format_realip.conf /etc/nginx/conf.d
sudo rm /etc/nginx/mime.types
sudo ln -s /srv/opf/conf/nginx/mime.types /etc/nginx/

On obf and opf Modified their configuration to remove ssl section, change log path and access log format, and to set real_ip_resursive options (it's all in git)

test it: 

sudo nginx -t

Apache#

On obf and opf we start by removing default config and disabling mpm_event in favor of mpm_prefork, and change logs permissions 

sudo unlink /etc/apache2/sites-enabled/000-default.conf
sudo a2dismod mpm_event
sudo a2enmod mpm_prefork
sudo chown off:off -R /var/log/apache2 /var/run/apache2
and edit /etc/apache2/envvars to use off user: 
#export APACHE_RUN_USER=www-data
export APACHE_RUN_USER=off
#export APACHE_RUN_GROUP=www-data
export APACHE_RUN_GROUP=off

On obf:

  • Add configuration for obf in sites enabled 
    sudo ln -s /srv/obf/conf/apache-2.4/sites-available/obf.conf /etc/apache2/sites-enabled/
  • link mpm_prefork.conf to a file in git, identical as the one in production 
    sudo rm /etc/apache2/mods-available/mpm_prefork.conf
sudo ln -s /srv/obf/conf/apache-2.4/obf-mpm_prefork.conf /etc/apache2/mods-available/mpm_prefork.conf
  • use customized ports.conf for obf (8002) 
    sudo rm /etc/apache2/ports.conf
sudo ln -s /srv/obf/conf/apache-2.4/obf-ports.conf /etc/apache2/ports.conf

On opf:

  • Add configuration for opf in sites enabled 
    sudo ln -s /srv/opf/conf/apache-2.4/sites-available/opf.conf /etc/apache2/sites-enabled/
  • link mpm_prefork.conf to a file in git, identical as the one in production 
    sudo rm /etc/apache2/mods-available/mpm_prefork.conf
sudo ln -s /srv/opf/conf/apache-2.4/opf-mpm_prefork.conf /etc/apache2/mods-available/mpm_prefork.conf
  • use customized ports.conf for opf (8003) 
    sudo rm /etc/apache2/ports.conf
sudo ln -s /srv/opf/conf/apache-2.4/opf-ports.conf /etc/apache2/ports.conf

test it in both container: 

sudo apache2ctl configtest

We can restart apache2 then nginx: 

sudo systemctl restart apache2
sudo systemctl restart nginx

Problem when restarting apache2 on obf#

In /var/log/apache2/error.log 

Could not load taxonomy: /srv/obf/taxonomies/inci_functions.result.sto
repairing: 
cp /srv/obf-old/taxonomies/inci_functions* /srv/obf/taxonomies/

creating systemd units for timers jobs#

We install mailx

sudo apt install mailutils

We copy the units from opff branch.

git checkout origin/opff-main conf/systemd/
git add conf/systemd/
git commit -a -m "build: added systemd units"
and link them at system level 
declare -x PROJ_NAME=opf
sudo ln -s /srv/$PROJ_NAME/conf/systemd/gen_feeds\@.timer /etc/systemd/system
sudo ln -s /srv/$PROJ_NAME/conf/systemd/gen_feeds\@.service /etc/systemd/system
sudo ln -s /srv/$PROJ_NAME/conf/systemd/gen_feeds_daily\@.service /etc/systemd/system
sudo ln -s /srv/$PROJ_NAME/conf/systemd/gen_feeds_daily\@.timer /etc/systemd/system
sudo ln -s /srv/$PROJ_NAME/conf/systemd/email-failures\@.service /etc/systemd/system
# account for new services
sudo systemctl daemon-reload

Test failure notification is working:

sudo systemctl start email-failures@gen_feeds__$PROJ_NAME.service

Test systemctl gen_feeds services are working:

sudo systemctl start gen_feeds_daily@$PROJ_NAME.service
sudo systemctl start gen_feeds@$PROJ_NAME.service

Activate systemd units:

sudo systemctl enable gen_feeds@$PROJ_NAME.timer
sudo systemctl enable gen_feeds_daily@$PROJ_NAME.timer
sudo systemctl daemon-reload

Adding failure notification for apache and nginx in systemd#

We can add the on failure notification we created for timers to apache2.service and nginx.service. We can get them from opff (at the time of writting it's on a specific branch)

declare -x PROJ_NAME=obf
cd /srv/$PROJ_NAME
sudo -u off git checkout origin/opff-reinstall-fixes -- conf/systemd/{apache2.service.d,nginx.service.d}
sudo ln -s /srv/opff/conf/systemd/nginx.service.d /etc/systemd/system/
sudo ln -s /srv/opff/conf/systemd/apache2.service.d /etc/systemd/system/
sudo systemctl daemon-reload

log rotate perl logs#

declare -x PROJ_NAME=obf

We get conf/logrotate/apache from opff and install it:

cd /srv/$PROJ_NAME
sudo -u off git checkout origin/opff-main -- conf/logrotate/apache2
sudo rm /etc/logrotate.d/apache2
sudo ln -s /srv/$PROJ_NAME/conf/logrotate/apache2 /etc/logrotate.d/apache2
# logrotate needs root ownerships
sudo chown root:root /srv/$PROJ_NAME/conf/logrotate/apache2

We can test with: 

sudo logrotate /etc/logrotate.conf --debug

Installing mongodb client#

We need mongodb client to be able to export the database in gen_feeds.

I'll follow official doc for 4.4 https://www.mongodb.com/docs/v4.4/tutorial/install-mongodb-on-debian/, but we are on bullseye, and we just want to install tools.

curl -fsSL https://pgp.mongodb.com/server-4.4.asc | \
   sudo gpg -o /usr/share/keyrings/mongodb-server-4.4.gpg \
   --dearmor
echo "deb [ signed-by=/usr/share/keyrings/mongodb-server-4.4.gpg ] http://repo.mongodb.org/apt/debian bullseye/mongodb-org/4.4 main" | \
  sudo tee /etc/apt/sources.list.d/mongodb-org-4.4.list
sudo apt update
sudo apt install  mongodb-database-tools

Test with curl#

for obf: 

declare -x DOMAIN_NAME=openbeautyfacts
declare -x PORT_NUM=8002

for opf: 

declare -x DOMAIN_NAME=openproductsfacts
declare -x PORT_NUM=8003


curl localhost:$PORT_NUM/cgi/display.pl --header "Host: fr.$DOMAIN_NAME.org"

Nginx call 

curl localhost --header "Host: fr.$DOMAIN_NAME.org"

Using Matomo instead of google analytics#

Copied configuration from OPFF and adapted with site id after creation of sites in Matomo.

Reverse proxy configuration#

certbot wildcard certificates using OVH DNS#

We already install python3-certbot-dns-ovh so we just need to add credentials.

$ declare -x DOMAIN_NAME=openbeautyfacts

Generate credential, following https://eu.api.ovh.com/createToken/

Using (for obf):

  • name: off proxy openbeautyfacts.org
  • description: nginx proxy on off2 for openbeautyfacts.org
  • validity: unlimited
  • GET /domain/zone/ (note: the last / is important !)
  • GET/PUT/POST/DELETE /domain/zone/openbeautyfacts.org/*

and we put config file in /root/.ovhapi/openbeautyfacts.org and /root/.ovhapi/openproductsfacts.org 

$ mkdir /root/.ovhapi
$ vim /root/.ovhapi/$DOMAIN_NAME.org
...
$ cat /root/.ovhapi/$DOMAIN_NAME.org
# OVH API credentials used by Certbot
dns_ovh_endpoint = ovh-eu
dns_ovh_application_key = ***********
dns_ovh_application_secret = ***********
dns_ovh_consumer_key = ***********

# ensure no reading by others
$ chmod og-rwx -R /root/.ovhapi

Try to get a wildcard using certbot, we will choose to obtain certificates using a DNS TXT record, and use tech -at- off.org for notifications. We first try with --test-cert 

$ certbot certonly --test-cert --dns-ovh --dns-ovh-credentials /root/.ovhapi/$DOMAIN_NAME.org -d $DOMAIN_NAME.org -d "*.$DOMAIN_NAME.org"
...
...

 - Congratulations! Your certificate and chain have been saved at:
   /etc/letsencrypt/live/xxxxx.org/fullchain.pem
and then without --test-cert 
$ certbot certonly --dns-ovh --dns-ovh-credentials /root/.ovhapi/$DOMAIN_NAME.org -d $DOMAIN_NAME.org -d "*.$DOMAIN_NAME.org"
...
...
 - Congratulations! Your certificate and chain have been saved at:
   /etc/letsencrypt/live/xxxxx.org/fullchain.pem
...

Create site config#

In the git repository, we copied the openpetfoodfacts config and changed names to the right domain.

Then we linked them: 

sudo ln -s /opt/openfoodfacts-infrastructure/confs/proxy-off/nginx/openbeautyfacts.org /etc/nginx/sites-enabled/
sudo ln -s /opt/openfoodfacts-infrastructure/confs/proxy-off/nginx/openproductsfacts.org /etc/nginx/sites-enabled/
# test
nginx -t
systemctl restart nginx

Testing#

To test my installation I added this to /etc/hosts on my computer: 

213.36.253.214 fr.openbeautyfacts.org world-fr.openbeautyfacts.org static.openbeautyfacts.org images.openbeautyfacts.org world.openbeautyfacts.org
213.36.253.214 fr.openproductsfacts.org world-fr.openproductsfacts.org static.openproductsfacts.org images.openproductsfacts.org world.openproductsfacts.org

And it works at first try :tada: !

Production switch#

Procedure for switch of obf off1 to off2#

  1. change TTL for openbeautyfacts domains to a low value in DNS

  2. enable NFS sharing of needed datasets:

    sudo zfs set sharenfs=on zfs-hdd/obf/products
sudo zfs set sharenfs=on zfs-hdd/obf/images

  3. shutdown obf on off2 sudo systemctl stop apache2 nginx

  4. Rync all data (on off2): 

    date && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/html/images/products/  /zfs-hdd/obf/images/products/ && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/html/data/  /zfs-hdd/obf/html_data/ && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/obf/deleted.images/ /zfs-hdd/obf/deleted.images/  && \
date
    obf/cache is skipped, nothing of interest.

    it took 17min

  5. products sync:

    • remove obf from sync products script
    • do a zfs send of only obf products with a modified version of the script

  6. shutdown obf on both side on off1: sudo systemctl stop apache2@obf and unlink /etc/nginx/sites-enabled/obf && systemctl reload nginx

  7. change DNS to point to new machine

  8. Rsync and zfs sync again

    rsync took 8 minutes

  9. ensure migrations works using NFS for off1 apps: 

    # move old prod
mv /srv/obf /srv/obf.old
# create dirs
mkdir -p /srv/obf/products /srv/obf/html/images/products
chown off:off -R /srv/obf
    then change /etc/fstab to mount off1 there: 
    # mount of opff zfs datasets via NFS to enable products migrations
10.0.0.2:/zfs-hdd/obf/products   /srv/obf/products   nfs rw,nolock   0   0
10.0.0.2:/zfs-hdd/obf/images/products    /srv/obf/html/images/products   nfs rw,nolock   0   0
    and mount: 
    mount /srv/obf/products
mount /srv/obf/html/images/products

  10. ensure migrations works using mounts for off2 apps:

    • edit 110 and 112 mount points to mount obf volumes instead of NFS shares, by editing /etc/pve/lxc/11{0,2}.conf
    • save your new settings to git folder: cp /etc/pve/lxc/110.conf /opt/openfoodfacts-infrastructure/confs/off2/pve/lxc_110.conf and cp /etc/pve/lxc/112.conf /opt/openfoodfacts-infrastructure/confs/off2/pve/lxc_112.conf
    • restart 110 and 112: sudo pct reboot 110; sudo pct reboot 112

  11. start obf on container off2/111 (obf): sudo systemctl start apache2 nginx

  12. check it works (remember to also clean your /etc/hosts if you modified it for tests)

  13. disable obf service on off1:

    • systemctl disable apache2@obf
    • unlink /etc/nginx/sites-enabled/obf && sytemctl reload nginx (if not already done)

  14. remove obf from snapshot-purge.sh on ovh3 (now handled by sanoid)

  15. on off2 and ovh3 modify sanoid configuration to have obf/products handled by sanoid and synced to ovh3

  16. don't forget to test that it still works after that

  17. off1 cleanup: - remove obf gen feeds from /srv/off/scripts/gen_all_feeds.sh and /srv/off/scripts/gen_all_feeds_daily.sh - remove or comment /etc/logrotate.d/apache2-obf

  18. off2 cleanup: - remove the NFS mounts of off1 obf data

Procedure for switch of opf off1 to off2#

  1. change TTL for openproductsfacts domains to a low value in DNS

  2. enable NFS sharing of needed datasets:

    sudo zfs set sharenfs=on zfs-hdd/opf/products
sudo zfs set sharenfs=on zfs-hdd/opf/images

  3. shutdown opf on off2 sudo systemctl stop apache2 nginx

  4. Rync all data (on off2): 

    date && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/html/images/products/  /zfs-hdd/opf/images/products/ && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/html/data/  /zfs-hdd/opf/html_data/ && \
sudo rsync --info=progress2 -a -x 10.0.0.1:/srv/opf/deleted.images/ /zfs-hdd/opf/deleted.images/  && \
date
    opf/cache is skipped, nothing of interest.

  5. products sync:

    • remove opf from sync products script
    • do a zfs send of only opf products with a modified version of the script

    rsync took 7 min.

  6. shutdown opf on both side on off1: sudo systemctl stop apache2@opf and unlink /etc/nginx/sites-enabled/opf && systemctl reload nginx

  7. change DNS to point to new machine

  8. Rsync and zfs sync again

    rsync took 2 min

  9. ensure migrations works using NFS for off1 apps: 

    # move old prod
mv /srv/opf /srv/opf.old
# create dirs
mkdir -p /srv/opf/products /srv/opf/html/images/products
chown off:off -R /srv/opf
    then change /etc/fstab to mount off1 there: 
    # mount of opff zfs datasets via NFS to enable products migrations
10.0.0.2:/zfs-hdd/opf/products   /srv/opf/products   nfs rw,nolock   0   0
10.0.0.2:/zfs-hdd/opf/images/products    /srv/opf/html/images/products   nfs rw,nolock   0   0
    and mount: 
    mount /srv/opf/products
mount /srv/opf/html/images/products

  10. ensure migrations works using mounts for off2 apps:

    • edit 110 and 111 mount points to mount opf volumes instead of NFS shares, by editing /etc/pve/lxc/11{0,1}.conf
    • save your new settings to git folder: cp /etc/pve/lxc/110.conf /opt/openfoodfacts-infrastructure/confs/off2/pve/lxc_110.conf and cp /etc/pve/lxc/111.conf /opt/openfoodfacts-infrastructure/confs/off2/pve/lxc_111.conf
    • restart 110 and 111: sudo pct reboot 110;sudo pct reboot 111

  11. start opf on container off2/112 (opf): sudo systemctl start apache2 nginx

  12. check it works (remember to also clean your /etc/hosts if you modified it for tests)

  13. disable opf service on off1:

    • systemctl disable apache2@opf
    • unlink /etc/nginx/sites-enabled/opf && sytemctl reload nginx (if not already done)

  14. remove opf from snapshot-purge.sh on ovh3 (now handled by sanoid)

  15. on off2 and ovh3 modify sanoid configuration to have opf/products handled by sanoid and synced to ovh3

  16. don't forget to test that it still works after that

  17. off1 cleanup: - remove opf gen feeds from /srv/off/scripts/gen_all_feeds.sh and /srv/off/scripts/gen_all_feeds_daily.sh - remove or comment /etc/logrotate.d/apache2-opf

  18. off2 cleanup: - remove the NFS mounts of off1 opf data

TODO#

# to be handled by creating symlinks to off-web
lang/??/texts/contacts.html -> /srv/off/lang/??/texts/contacts.html
lang/??/texts/press.html -> /srv/off/lang/??/texts/presskit.html

DONE#

products -> /rpool/obf/products
users -> /srv/off/users
users_emails.sto -> /srv/off/users_emails.sto

# updated in git
html/robots.txt -> /srv/off/html/robots.txt

WONTFIX#

# javascript
html/bower_components -> /srv/obf/node_modules/@bower_components
html/js-old/jquery-interestingviews-selectclip.js -> /home/off-fr/cgi/jquery-interestingviews-selectclip.js
html/js-old/product.js -> /home/off-fr/cgi/product.js
html/js/bak2/jquery-interestingviews-selectclip.js -> /home/off-fr/cgi/jquery-interestingviews-selectclip.js
html/js/bak2/jquery.rotate.js -> jQueryRotateCompressed.2.1.js
html/js/bak2/jquery.tagsinput.css -> xoxco-jQuery-Tags-Input-6d2b1d3/jquery.tagsinput.css
html/js/bak2/jquery.tagsinput.js -> xoxco-jQuery-Tags-Input-6d2b1d3/jquery.tagsinput.js
html/js/jquery-interestingviews-selectclip.js -> /home/off-fr/cgi/jquery-interestingviews-selectclip.js

# off fr
lang/es/tags/labels.txt -> /home/off-fr/cgi/labels.es.txt
lang/fr/tags/categories.txt -> /home/off-fr/cgi/categories.txt
lang/fr/tags/labels.txt -> /home/off-fr/cgi/labels.txt
ingredients/additifs/authorized_additives.txt -> /home/off-fr/cgi/authorized_additives.pl
ingredients/additifs/extract_additives.pl -> /home/off-fr/cgi/extract_additives.pl

TODO#

# to be handled by creating symlinks to off-web
lang/??/texts/contacts.html -> /srv/off/lang/??/texts/contacts.html
lang/??/texts/press.html -> /srv/off/lang/??/texts/presskit.html

DONE#

products -> /rpool/opf/products
users -> /srv/off/users
users_emails.sto -> /srv/off/users_emails.sto

WONTFIX#

html/bower_components -> ../node_modules/@bower_components
html/images/misc/android-apk.svg -> /srv/opf/html/images/misc/android-apk-40x135.svg
html/robots.txt -> /srv/off/html/robots.txt

Annex: files difference for obf in git vs server#

TO DECIDE 

cgi/
  madenearme.pl
  madenearyou.pl

DONE different 

templates/donate_banner.tt.html

DONE missing 

html/
  robots-disallow.txt
  .well-known
html/.well-known/
  assetlinks.json
html/images/misc/
  obf-favicon.png
  obf-logo-en.white.2200x1800.png
  obf-logo-en.white.220x180.png
  obf-logo-fr.blanc.2200x1800.png
  obf-logo-fr.blanc.220x180.png
  openbeautyfacts-logo-de-178x150.png
  openbeautyfacts-logo-de-356x300.png
  openbeautyfacts-logo-es-356x300.png
  openbeautyfacts-logo-it-178x150.png
  openbeautyfacts-logo-it-356x300.png
  openbeautyfacts-logo-pl-178x150.png
  openbeautyfacts-logo-pl-356x300.png
  openbeautyfacts-logo-pt-356x300.png
  openbeautyfacts-logo-ru-178x150.png
  openbeautyfacts-logo-ru-356x300.png
html/images/misc/microsoft
  Chinese-Traditional.svg
  Czech.svg
  Dutch.svg
  Finnish.svg
  German.svg
  Hebrew.svg
  Hungarian.svg
  Japanese_get it from MS_864X312.svg
  Korean.svg
  microsoft
  Portuguese-Portugal.svg
  Russian.svg
  Slovak.svg
  Slovenian.svg
  Turkish.svg
  Vietnamese.svg
lib/ProductOpener
  SiteQuality_off.pm
po/common
  nl_be.po
  pt_pt.po
po/tags
  nl_be.po
  pt_pt.po

TODO 

lang/**/texts/
  open-beauty-hunt.html
  open-beauty-facts-mobile-app.html
lang/fr/texts
  missions_list.html

index/ # put in cache
  categories_nutriments_per_country.??.sto
  countries
  countries_points.sto
  ambassadors_countries_points.sto
  ambassadors_users_points.sto

TODO differently 

log
log.conf

products
users
users_emails.sto

scripts: ProductOpener
lib/ProductOpener
  SiteQuality.pm
  SiteLang.pm

WONTFIX missing 

css
js
missions.sto
texts
test
translate
html/js:
  dist
  autoresize.jquery.min.js ?
  canvas-to-blob.min.js
  carouFredSel
  datatables.js
  countries
html:
  index.obf.shtml
  index.shtml
  index.txt
  make_static.sh
  md5sum
html/images/misc
  additives.new.html
  additives.old.html
  apps
  a.338x72.png
  ajax-loader.gif
  android-apk.112x40.png
  android-apk.131x47.png
  android-apk-old.svg
  b.338x72.png
  c.338x72.png
  d.338x72.png
  e.338x72.png
  google-play-badge-svg-master
html/images/icons
  egg.svg
  egg.white.96x96.png
  egg.white.svg
  leaf.svg
  leaf.white.96x96.png
  leaf_white.svg
  monkey_happy.svg
  monkey_happy.white.96x96.png
  monkey_happy.white.svg
  monkey_uncertain.svg
  monkey_uncertain.white.96x96.png
  monkey_uncertain.white.svg
  monkey_unhappy.svg
  monkey_unhappy.white.96x96.png
  monkey_unhappy.white.svg
html/images/lang/en/labels  # WON'T FIX food labels
  doca-rioja.121x90.png
  do-manzanilla-sanlucar-de-barrameda.54x90.png
  do-montilla-moriles.145x90.png
  do-navarra.77x90.png
  do-toro.108x90.png
  eg-oko-verordnung.110x90.svg
  ohne-gentechnik.90x90.svg
  pdo-arroz-de-calasparra.74x90.png
  pdo-arroz-de-valencia.90x90.png
  pdo-azafran-de-la-mancha.78x90.png
  pdo-chufa-de-valencia.52x90.png
  pdo-estepa.76x90.png
  pdo-montes-de-granada.91x90.png
  pdo-montes-de-toledo.64x90.png
  pdo-pasas-de-malaga.72x90.png
  pdo-pera-de-lleida.34x90.png
  pdo-peras-de-rincon-de-soto.88x90.png
  pdo-pimenton-de-la-vera.52x90.png
  pdo-pimenton-de-murcia.78x90.png
  pdo-sierra-de-segura.133x90.png
  pdo-vinagre-de-jerez.54x90.png
  pgi-alubia-de-la-baneza-leon.120x90.png
  pgi-berenjena-de-almagro.40x90.png
  pgi-esparrago-de-navarra.85x90.png
  pgi-garbanzo-de-fuentesauco.160x90.png
  pgi-lenteja-de-la-armuna.95x90.png
  pgi-lenteja-pardina-de-tierra-de-campos.120x90.png
  pgi-mazapan-de-toledo.96x90.png
  pgi-pemento-do-couto.142x90.png
  pgi-platano-de-canarias.128x90.png
  pgi-turron-de-alicante.74x90.png
  pgi-turron-de-jijona.74x90.png
  real-california-milk-90x90.png
cgi/:
  product-multilingual.js
  profile.plpo/common
  nl_be.po
  pt_pt.po
po/tags
  nl_be.po
  pt_pt.po

lib/
  startup.pl

packager-codes/
  FR-merge.csv

po/common
  common-web.pot
po/openfoodfacts:
  nl_be.po
po/openpetfoodfacts
  nl_be.po
scss:
  app.scss
  templates

Annex files difference for opf in git vs server#

TO DECIDE 

html/images/banners/donate/
  donate-banner.independent.fr.1600x300.png
  donate-banner.research.fr.1600x300.png
  donate-banner.personal.fr.1600x300.png

html/
  countries.html
  langs.html
  products_countries.html
translate/
  categories.ru.txt
  ingredients.ru.txt

TODO 

lang/

DONE missing 

.well-known/assetlinks.json
/home/alex/docker/tmp/opf-old/html/images/misc/microsoft/
  Chinese-Traditional.svg
  Czech.svg
  Dutch.svg
  Finnish.svg
  German.svg
  Hebrew.svg
  Hungarian.svg
  Korean.svg
  Portuguese-Portugal.svg
  Russian.svg
  Slovak.svg
  Slovenian.svg
  Turkish.svg
  Vietnamese.svg
lib/ProductOpener
  SiteQuality.pm
cgi/
  madenearme.pl
  madenearyou.pl

DONE modified 

html/products_countries.js # contains "Open Products Facts"
madenearme/
  madenearme-fr.html
  madenearme-uk.html

TODO differently 

html/css/dist/
htm/icons/dist
html/js/dist
lib/ProductOpener
  Config.pm  # link
  Config2.pm  # local only
  SiteQuality.pm  # link

index/*.sto  # generated files to put in cache
po/site-specific  # link
Lang.openproductsfacts.org.sto

WONTFIX modified 

emb_codes/villes-geo-france-galichon-20130208.csv
dump/*
html/files/tagline-off.json
lib/ProductOpener/Config_opff.pm
po/ # small changes

WONTFIX missing 

fonts/icons/*
html/lang/de/labels/*.png  # renamed or moved to en
html/lang/fr/labels/*.png

html/images/misc/google-play-badge-svg-master  # made a zip sent to pierre

html/images/misc/
  android-apk-40x135.svg
  android-apk-old.svg
  android-apk.112x40.png
  android-apk.131x47.png
html/js/
  barcode
  cropper-20150415
  jquery.tagsinput.20150416
  jquery.imgareaselect-0.9.8
  jquery.autocomplete.20150416
  jquery-ui-1.11.4
  gnuwilliam-jQuery-Tags-Input-a648557
  lang/*
  xoxco-jQuery-Tags-Input-6d2b1d3
  zeroclipboard
  ZeroClipboard.js
  ZeroClipboard.swf
  autoresize.jquery.min.js
  canvas-to-blob.min.js
  datatables.js
  jquery.form.js.old
  jquery.iframe-transport.js
  jquery.iframe-transport.min.js
  jquery.imgareaselect-0.9.8.zip
  jquery.autoresize.js
  jquery.cookie.js
  jquery.cookie.js.js
  jquery.cookie.min.js
  jquery.fileupload-ip.js
  jquery.fileupload-ip.min.js
  jquery.fileupload.js
  jquery.fileupload.min.js
  highcharts.js
  highcharts.js.2.2.5
  highcharts.js.3.0.1
  highcharts.js.4.0.4
  jQueryRotateCompressed.2.1.js
  jquery.rotate.js
  jquery.transit.min.js
  load-image.min.js
  mColorPicker.js
  mColorPicker_min.js
  mColorPicker_min.js.old
  master
  zeroclipboard-1.0.7.tar
mediawiki/*  # seems out of place
node_modules/  # no nodes
packager-codes/
scripts/
  # dead code
  fix_code_stored_as_number.pl
  fix_countries_removed_by_yuka.pl
  fix_deleted_products.pl
  fix_leading_zeros.pl
  fix_product.pl
  fix_product2.pl
  franprix.pl
  gen_categories_stats.pl
  gen_top_tags.pl
  import_xxx.sh
  nutrinet_libelles.pl
  nutrinet_libelles2.pl
  po2jqueryi18.pl
  remove_deleted_products_form_db.pl
  test_addifitfs.pl
  update_texts_from_wiki.pl
  update_users.pl
  upload_photos.pl
  upload_photos_2016_franprix.pl
  upload_photos_2018_liege.pl
  upload_photos_foodvisor.sh
  upload_photos_saintelucie_maisonduthe.sh
  upload_photos_scanparty_rotterdam_1.sh
  upload_photos_scanparty_rotterdam_ekoplaza.sh
t/sitequality.t # renamed